Let’s Set Sail

Let’s Set Sail

All images © 1990-2022 Stampin’ Up!®

 

Supplies:

 

• Stamp Set: Let’s Set Sail (157900) or discounted as a bundle with the Sailboat Builder Punch (157906)

• Card Stock and Paper: Crumb Cake(120953); Early Espresso (119686); Basic White (159276); Daffodil Delight (119683); So Saffron (105118); Granny Apple Green (146990)

• Stamp Pads:  Early Espresso Classic Stampin' Pad (147114); Coastal Cabana Classic Stampin' Pad (147097); Pool Party Classic Stampin' Pad (147107)

• Tools: Horizon Dies (157778); Tasteful Labels Dies (152886); Sailboat Builder Punch (157905) or discounted as a bundle with the Let’s Set Sail Stamp Set (157906); Mini Stampin’ Cut & Emboss Die Cutting Machine (150673)

• Miscellaneous: Rhinestone Waves Basic Jewels (159396)); Bakers Twine Essentials Pack (155475); Stampin’ Dimensionals (104430); Stampin’ Seal Adhesive (152813); Mini Glue Dots (103683); Fine Tip Glue Pen (138309)

 

Measurements:

 

• Crumb Cake: 5 1/2" x 8 1/2" scored at 4 1/4"

• Early Espresso: 5 1/4" x 4”

• Basic White:  5 1/8” x 3 7/8”

 

Instructions:

 

1. Adhere the Early Espresso layer to the Crumb Cake card base

2. Use the water stamp from Let’s Set Sail and Pool Party Ink to stamp the ‘sea’ four times, overlapping and staggering each one – for a muted look like mine, stamp ‘off’ each time on a piece of scrap paper before stamping on your cardstock

3. Use a die from Horizon Dies to cut the ‘sand’ from So Saffron cardstock and adhere – use the grass die and Granny Apple Green cardstock to create the dune grass and adhere in place.

4. Use the sand die again to cut out a piece of Daffodil Delight cardstock – trim to size and adhere onto the grass with Stampin’ Dimensionals

5. Die cut the fence out of Crumb Cake cardstock, add a bow and adhere in place

6. Stamp the sailboat using Early Espresso Ink and the sails using Coastal Cabana Ink – use the Sailboat Punch to cut out the pieces – glue the boat in place and add the sails with Stampin’ Dimensionals

7. Stamp the seagulls at the left top and stamp the sentiment onto a scrap piece of white cardstock using Early Espresso Ink– cut out using a die from Tasteful Labels Dies and add to the card with Dimensionals

8. Add some Rhinestone Jewels and adhere to the Espresso layer

Amazing Silhouettes

Amazing Silhouettes

All images © 1990-2022 Stampin’ Up!®

 

Supplies:

 

Stamp Sets: Amazing Silhouettes (157814)

• Card Stock and Paper: Crumb Cake (120953), Basic White (159276), Early Espresso (119686)

• Stamp Pads: Versamark (102283), Sunshine & Rainbows DSP (158126)

• Tools: Heat Tool (129053), Stampin’ Emboss Powders Basics (155554), Layering Circle dies (151770), Painted Labels dies (151605), Stripes & Splatters 3D embossing folders (157980)

• Miscellaneous: Stampin’ Dimensionals(104430); Stampin’ Seal Adhesive (152813), Linen Thread (104199)

 

Measurements:

 

• Crumb Cake: 4 ¼” x 11”

• Crumb Cake: 1 ¾” x 4 ¼”

• Sunshine & Rainblows: ¾” x 4 ¼”

• Linen Thread:14”

 

Instructions:

 

1. Cut a 4 ¼” x 11” Crumb Cake card base. Fold in half.

2. Stamp the leaf image (3x) across the middle of the card front using Versamark ink.

3. Sprinkle the images with White embossing powder and heat set.

4. Cut a 1 ¾” x 4 ¼” piece of Crumb Cake cardstock.

5. Emboss using the Splatters embossing folder.

6. Wrap a 14” piece of Linen Thread (2x) around the cardstock and tie in a bow on the right side.

7. Adhere along the bottom of the card front.

8. Cut a ¾” x 4 ¼” piece of Soft Seafoam designer paper.

9. Adhere above the Splatter embossed cardstock.

10. Cut a swirl label from Basic White cardstock and adhere to the card front.

11. Stamp the sentiment onto a 2 ½” x 2 ½” (or scrap) piece of Early Espresso cardstock using Versamark ink.

12. Sprinkle with White embossing powder and heat set.

13. Cut using the 1 7/8” Layering Circle die.

14. Cut a 2” Layering Scallop Circle from a 2 ½” x 2 ½” (or scrap) piece of Basic White cardstock.

15. Adhere the circles together.

16. Adhere the circle to the label using Stampin’ Dimensionals.

 

Autumn Thank You

An Autumn Thank You 

Mint Macaroon, Bumblebee and Early Espresso. A beautiful colour combo, don’t you think? 

And with a touch of Cajan Craze speaks total Fall to me. 

This is what I made for my weekly CASE-ing #267. 

Here’s the bits and bobs.

Base is 8.5”x5.5” scored at 4 1/4” on the 8.5” side.

DSP is 5 1/4”x 4”

The embossed piece is 3.5” x 3” and was embossed.

You’ll need scrapes of card stock to stamp and punch out your leaves. You can do as many leaves as you wish. 

With your Bone Folder curl your leaves outward.

Adhere your hoop to the embossed piece using glue dots.

With Mini dimensionals add to the back of leaves and place around the hoop.

 Just be careful that you don’t adhere them onto the hoop. 

Now put your card together. 

Bet ya it’s gorgeous!  Great job. 

Thanks so much for joining me. 

Cheers🍻

Sharon

Product List 

Beautiful Autumn Bundle (English) [155189] $68.25	Bumblebee Classic Stampin' Pad [153116] $10.25	Early Espresso Classic Stampin' Pad [147114] $10.25	Mint Macaron Classic Stampin' Pad [147106] $10.25
Cajun Craze 8-1/2" X 11" Cardstock [119684] $12.00	Gilded Autumn Specialty Designer Series Paper [153520] $20.00	Gold Hoops Embellishments [152474] $10.25	Forever Greenery Trim Combo Pack [152475] $12.25
Very Vanilla 8-1/2" X 11" Cardstock [101650] $13.25	Brick & Mortar 3D Embossing Folder [149643] $13.50	Stampin' Cut & Emboss Machine [149653] $163.00

Oh, it’s a beautiful World! 
This bundle is perfect for making masculine cards.
And you’ll also need the World of Good DSP. I’m loving the hints of Brass throughout the DSP.
The Brass gives that hint bling that’s not noticeable. 😂
And for those who know me I’m loving the bling! 

Here’s the how to’s
Card base is 8 1/2” x 5 1/2” scored at 4 1/4” on the longer side.
The Brass Foil is 5 1/4” x 4 “. You’re going to want to take your Globe die and the stars from the Stitched Stares and centre them in the centre of the Brass foil. And rumps it through your die cutting machine. The next layer is 5”x 3 3/4”. And the piece for the sentiment will need to be the size you need for your sentiment. Mine was 1 1/4”x 2 3/4”. I did trim it down to fit the sentiment.
I glued the layer with my liquid glue and added dimensionals to the Globe, stars and sentiment.

Wanting to thank you so much for stopping by. 

Product List

Beautiful World Bundle (English) [154091] $65.50	Stitched Stars Dies [150653] $52.00	World Of Good Specialty Designer Series Paper [152491] $20.00	Brass Foil Sheets [153057] $6.75	Early Espresso 12" X 12" Card Stock [124276] $7.25	Very Vanilla 8-1/2" X 11" Cardstock [101650] $13.25
Early Espresso Classic Stampin' Pad [147114] $10.25	Mini Stampin' Dimensionals [144108] $5.50	Stampin' Dimensionals [104430] $5.50

CASE-ing Tuesday #125

This was the first time I use this set. And totally loooving it. So easy to use. Just think this set using the Stamparatus, oh the possibilities! 

Escape the Ordinary and come Stamp with me.