Nuts & Bolts

Nuts & Bolts

All images © 1990-2022 Stampin’ Up!®

 

Supplies:

 

• Stamp Sets: Nuts & Bolts (157650)

• Card Stock and Paper: Basic White (159276); Basic Black (121045); Real Red (102482); Pattern Party (Hostess) Designer Series Paper (155426)

• Stamp Pads: Real Red (147084); Memento Tuxedo Black (132708)

• Tools: Layering Circles Dies (151770); Bouquet  of Love Dies (157641); Stampin’ Cut & Emboss Machine (149653); Paper Snips (103579)

• Miscellaneous: Stampin’ Dimensionals(104430); Stampin Blends Combo packs in Smoky Slate (154904); Playful Pets Trim Combo Pack (152466); Stampin’ Seal Adhesive (152813); Classic Matte Dots (158146); Mini Glue Dots (103683)

 

Measurements:

 

• Basic White: 8 ½ X 5 ½ scored at 4 ¼ and burnished with the Bone Folder, remainder of sheet for stamping and diecutting

• Basic Black: 3 ¾” x 5”

• Real Red:  1 ½” X 1 ½” scrap for heart

• Pattern Party Designer Series Paper (DSP): 3 ½” 4 ¾”

 

Instructions:

 

1. Attach DSP to Basic Black cardstock with Stampin’ Seal Adhesive and tie the red Playful Pets Trim into a bow around it.  Attach to card base with Stampin’ Seal Adhesive.

2. Cut largest circle and second to smallest circle from Basic White cardstock using the Layering Circles Dies and the Stampin’ Cut & Emboss Machine.  While you’reat it, cut heart using Real Red cardstock and the Bouquet of Love dies.

3. Stamp the robot image onto the large circle using Memento Tuxedo Black ink and color using the light and dark Smoky Slate Stampin’ Blends.

4. Stamp sentiment in Real Red ink onto the small circle. 

5. Attach both circles to card using Stampin’ Dimensional over the ribbon. 

6. Attach heart with Stampin’ Dimensionals and the black & white twine from the Playful Pets Trim using a Mini Glue Dot.

7. Add three white Classic Matte Dots to heart.

Love & Happiness

Love & Happiness

All images © 1990-2022 Stampin’ Up!®

 

Supplies:

 

• Stamp Sets: Love & Happiness (157633)

• Card Stock and Paper: Basic Black CS (121045); Basic White CS (159276);Thick Basic Black (159299)

• Stamp Pads: Memento Tuxedo Black Ink (132708)

• Tools: Bouquet of Love Hybrid Embossing Folder (157641)

• Miscellaneous: Paper Snips Scissors (103579); Stampin’ Dimensionals(104430); Multipurpose Liquid Glue (110755); Stampin’ Cut & Emboss Machine (149653)

Measurements:

 

• Thick Basic White CS:  5 ½” x 8 ½” scored @ 4 ¼”

• Basic White CS:  4” x 5 ¼”, 4” x 4” 

• Basic Black CS: 3” x 3” 

 

Instructions:

 

1. Measure, score and cut your paper. 

2. Die cut the largest heart with the Basic Black and Basic White. Die cut the smallest heart in Basic White and the largest label. 

3. Emboss the Basic White 4” x 5 ¼” with the Bouquet of Love Embossing Folder. Then center the large Black and White heart and emboss them one at a time. 

4. Stamp in Memento Tuxedo Black on the small heart “To the cutest couple” and stamp onto the large label “Happy Wedding Day”.

5. Assemble by using the Multipurpose Liquid Glue to attach the embossed Basic White. Use Dimensionals to attach the black and white hearts overlapping on the top. Use a Dimensional to attach the small heart over the black and white hearts. Use Dimensionals on the back of the “Happy Wedding Day” label. 

 

Toast in the New Year 202

Watercolor Shapes

All images © 1990-2021 Stampin’ Up!®

 

Supplies:

• Stamp Sets: Watercolor Shapes (156968); Best Year (152568); A Wish for Everything (149320)

• Card Stock (CS) and Paper: Thick Basic White (159229); Basic Black (121045)

• Stamp Pads: Bumblebee (153116); Gray Granite (147118); Memento Black (132708)

• Tools: Stampin’ Cut & Emboss Machine (149653); Paper Snips (103579); Tasteful Textile 3D Embossing Folder (152718); So Saffron Stampin’ Blends (154905)

• Miscellaneous: Wink of Stella® Clear Glitter Brush (141897); Gold Simply Elegant Trim (155766); Genial Gems (155500); Stampin’ Dimensionals(104430); Stampin’ Seal Adhesive (152813); Mini Glue Dots (103683); 

 

Measurements:

 

• Thick Basic White CS: 5-1/2” x 8-1/2” scored at 4-1/4”, 1-1/8” x 2-3/4”,  3-1/2” x 4-1/4”, and 3-13/16” x 5-1/16”

• Basic Black CS: 4” x 5-1/4” and 3/4” x 3-3/16”

 

Instructions:

 

1. Score a 5-1/2” x 8-1/2” piece of Thick White CS at 4-1/4”; fold to create a card base.

2. Stamp 3-13/16” x 5-1/16” piece of Thick White CS with circle images in Bumblebee ink.  Add Wink of Stella® Clear Glitter shading to the right edge of each stamped circle. Add texture to the card front with Tasteful Textile 3D Embossing Folder.  Glue to a 4” x 5-1/4” piece of Basic Black CS. Mount to the center front of the card base using Stampin’ Dimensionals.

3. Trim the left end of the 3/4” x 3-3/16” Basic Black CS strip and the 1-1/8” x 2-3/4” Thick White CS strip into a banner shape.  Glue the black strip to the front of the card base in the bottom right corner 1/4” from the bottom edge.  Stamp the white strip with sentiment in Memento Black ink.  Glue to the bottom right corner 1/2” from the bottom edge over the black strip.

4. Stamp two champagne glasses on the 3-1/2” x 4-1/4” piece of Thick White CS as follows: Load large oval stamp with Gray Granite ink with one end off the edge 1/4” to create a flat top; stamp off twice before stamping on the cardstock. Repeat for second glass.  Add Gray Granite ink to the smaller rectangle stamp to create a 1/8” x 1-1/8” glass stem, once again stamping off twice before stamping on the cardstock at the bottom of the large oval. Repeat for the second glass.  Load the left 3/4” end of the thin oval stamp with Gray Granite ink, stamp off twice and stamp at the bottom of the glass stem overlapping about 1/4” on the top.  Clean and dry the stamp. Load the right 3/4” of the thin oval stamp with Gray Granite ink, stamp off twice.  Stamp on the right side of the existing thin oval on the left to finish the bottom of the glass. Try not to overlap the left and right edges. Repeat for second glass. Color both champagne glasses with Light and Dark So Saffron Stampin’ Blends. Trim out the glasses with Paper Snips.Add Wink of Stella® Clear Glitter shading to each glass.  Mount to the front of the card base using Stampin’ Dimensionals.

5. Tie a 5” piece of Gold Simply Elegant Trim into a bow; mount to the top of the glass stem with a Mini Glue Dot. Repeat for second glass.  

6. Stamp the bottom right inside corner of the card base with one large and three small circle images to match the front of the card in Bumblebee ink.  Add Wink of Stella® Clear Glitter shading to the right side of each stamped circle. Stamp “Happy New Year’s” in the middle of the large circle in Memento Black ink. 

7. Finish the card by adding 3 Gold Genial Gems above each of the glass rim tops.

 

 

In Bloom

In Bloom

All images © 1990-2021 Stampin’ Up!®

 

Supplies:

• Stamp Sets: In Bloom (158218

• Card Stock and Paper: Basic Black Card Stock or (CS) (121045); Polished Pink Card Stock (155710); Old Olive Card Stock (100702);Daffodil Delight Card Stock (119683); Basic White Card Stock (159276);Patterned Party Designer Series Paper (DSP) (155426)

• Stamp Pads: Tuxedo Black Memento Ink (132708)

• Tools: Pierced Blooms Dies (154312); Tasteful Textile 3D Embossing Folder (152718)

• Miscellaneous: Gilded Gems(152478); Polished Pink 3/8” Open Weave Ribbon (154312); Stampin’Dimensionals (104430); Stampin’ Seal Adhesive (152813); Mini Glue Dots (103683)

 

Measurements:

 

• Basic Black: 8 1/2” x 5 ½” (card base); 4” x 5 ¼” (front panel)

• Scraps for die cutting flowers, leaves and label: Polished Pink, Old Olive, Basic White

• Black and White Buffalo Check pattern (DSP): 2” x 5 1/8” 

• White with black specs pattern (DSP): 2 ½” x 4” 

• Polished Pink Ribbon: 12”

 

Instructions:

 

1. Fold card base in half using bone folder 

2. Emboss the front panel using the tasteful textile 3D embossing folder 

3. Glue the DSP as per the photo using Stampin’ Seal 

4. Die cut the flowers and labels using the Pierced blooms dies 

5. Stamp the sentiment using memento ink 

6. Glue the label using dimensionals

7. Glue the flowers and leaves as per the picture using dimensionals and glue dots 

8. Make the bow and glue it to the card with glue dots

9. Add gilded gems to the flower centers as well as the card as per the picture

 

True Love Stories Last Forever

True Love Stories Last Forever...

When I first saw this bundle I wasn’t to sure. I loved the flower,

 then I saw the sentiments and knew that it was a must have.

And not to mention the DSP. It is simply so elegant! 

A bundle that is perfect for wedding and anniversary cards.

This is the card I make for #Casingtuesday 303 and my Facebook Live. 

And it was made with just stamps, card stock and Designers Series Paper.

Perfect for beginners.

Here’s the bits and bobs

Base 8.5” x 5.5” score on the long side at 4.25” 

DSP is 4”x 4.5”

Silver foil  is 3.25” x 

The Basic white is 3” x  4”

 

I used  the Stamparatus to stamp. I was able to stamp the flower and sentiment at the same time. And turned the plate over and stamped the tiny flowers.

Thinking the photo of the card shows you how to assemble the card.

Thanks so much for stopping by. Greatly appreciated.

Cheers! 🍻

Sharon

Product List

Simply Elegant Suite Collection (English) [155764] $79.75	Cinnamon Cider 8-1/2" X 11" Cardstock [153078] $12.00	Silver Foil Sheets [132178] $6.75	Basic White 8 1/2" X 11" Cardstock [159276] $13.25	Champagne Rhinestone Basic Jewels [151193] $8.25
Tuxedo Black Memento Ink Pad [132708] $8.25	Stamparatus [146276] $67.00

Enjoy with Pampered Pets💕

       Enjoy with Pampered Pets 

My Pampered Pets bundle was sitting on my stamp shelf collecting dust.

 So I decided that it was time to dust it off and play with it.

I must say that Stampin’Up!   make it so easy.

With they way they bundle up their suites. With just one number you have everything you need to complete super cute cards.

Oh and with the DSP it does list the colours on the backside for handy references. 

I must say the Real Red and Basic Black works excellent together. Do you think! 

I have listed everything below for easy reference for you.

Enjoy! 

                                             Cutting Instructions

                                                                      Card Stock 

Real Red         5 ½” x 8 ½” Card base

Real Red  2” x 4 3/4” Card front

Basic Black  3” x 2 ¼” Card front

Basic White 3 ½” x 4 ¾” Card inside

Scraps For image and sentiment

Designer Series Pape

Playful Pets  4”x 5 ¼”            Card front

                4” x 5 ¼” Card inside

Assembly Instructions

Card base

1. Fold the card base in half and burnish with your bone folder.

2. With your Liquid glue adhere the DSP to the front of your card

3. With the Greenery Embossing Folder emboss the Real Red Stripe with your Stamping Cut and Emboss machine. Glue onto the card base a little to the right on the DSP. 

4. You are now going to emboss the Basic Black with the Hammered Metal 3D folder. Adhere onto the card base. Place it on the edge of the DSP halfway down. I glue it down. 

Stamping Image

 

5. Stamp your image with Memento ink onto a scape piece of whisper white.  Once stamped colour with your blends. 

6. With the second largest Stitched Shapes cut out your image with the Stampin Cut and Embossing machine

7. Add a few dimensionals to the backside of the image.

8. Adhere this layer to the card front.

9. With the Memento ink stamp your image onto a scape piece card stock. 

10. Trim down, add dimensionals and add to the front of card.

11. Tie a little bow with a 6 inch piece of Playful Pets Trim Combo pack. I use the Real Red. But it’s your card use whatever you wish.

Inside of Card

12. Adhere the DSP inside the card using your liquid glue.

13. With your Real Red stamp hearts in the right hand corner of the card stock for the inside of the card. 

14. Glue onto the DSP.

Thank you so much for stopping by. 

Stay safe 

Cheers🍻

Sharon

XOXO

Product List 

Playful Pets Suite Collection [154136] $91.50	Real Red 8-1/2" X 11" Cardstock [102482] $12.00	Basic Black 8-1/2" X 11" Cardstock [121045] $12.00	Whisper White 8-1/2" X 11" Cardstock [100730] $13.25	Real Red Classic Stampin' Pad [147084] $10.25
Tuxedo Black Memento Ink Pad [132708] $8.25	Greenery Embossing Folders [152716] $11.00	Hammered Metal 3D Embossing Folder [150646] $12.25	Stitched Shapes Dies [145372] $41.00	Stampin' Cut & Emboss Machine [149653] $163.00
Stampin' Dimensionals [104430] $5.50	Multipurpose Liquid Glue [110755] $5.50	Real Red Stampin' Blends Combo Pack [154899] $12.00	Smoky Slate Stampin' Blends Combo Pack [154904] $12.00